₹888.00 - ₹388.00
(as of Jun 01,2022 02:23:38 UTC – Details)
1. Take the cap off and full fill pottery part with water. Soak it in water for 15 minutes.
2. Fix the cap tightly to pottery part and full fill it with water, no air in between. (You can do this step in the water)
3. Put the tube end into the water container with narrow openning such as water bottle.
4. Stick the cone pottery part into the soil of the plant.
1. Advice of quantity for different size flowerpot.
Dia 10~15cm=1 piece
Dia20cm+ =2 pieces+
2. Water can be replaced by plant nutrient liquid.
3. Clean pottery part every 3 months.
Q1: No watering
A1: Make sure the tube is full filled with water and without air and water container is higher than watering device.
Q2: Watering slow
A2: Place water container higher.
Q3: Watering fast
A3: Replace watering container with a bigger one or place water container in a lower position.
Q4: Water leakage at green cap
A4: Make sure the copper end cap of the tube is tightly fixed and place water container in lower position.
【Proper Watering】Plants-Automation watering can prevent under and overwatering, and promote healthier roots
【Good Quality】Made of high quality ceramic material, good permeability and weather resistant, durable for long service time. And the extra long stakes for stable device
【Practical Tool】A convenient and practical watering tool for those people who always go out and far from home, also suitable for lazy people, it would save your time and energy
【Long Last Duration】On average, a spike with a 1L bottle of water will last 5-7 days. Recommend 1 spike for a 6-inch pot. 3 spikes or more for a 12-inch pot